Traction Off Indicator Inoperative
Traction Off Indicator Inoperative
Circuit Description
The Traction Off indicator is controlled by the instrument cluster via serial data messages from the body control module (BCM). When the traction control system (TCS) switch is pressed, the BCM commands the instrument cluster to turn ON the Traction Off indicator.
The Traction Off indicator will also turn ON during the instrument cluster bulb check. When the ignition switch is turned to ON, the Traction Off indicator will turn ON for approximately 3 seconds and then turn OFF.
Test Description
The number below refers to the step number on the diagnostic table.
6. This step tests if the instrument panel cluster (IPC) is able to turn ON the Traction Off indicator.
