Trailing Arm Replacement

Trailing Arm Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the rear tire and wheel assembly.




3. Remove the 4 trailing arm bracket to body bolts.
4. Remove the rear parking brake cable routing bolt from the trailing arm.




5. Remove the 3 trailing arm to knuckle through bolts (1).
6. Lower the trailing arm to gain access to the trailing arm to bracket bolt and nut.




7. Remove the trailing arm to bracket bolt and nut.
8. Separate the trailing arm from the bracket and remove the trailing arm from the vehicle.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Position the the trailing arm to the bracket, install the bolt and nut.

Tighten the trailing arm to bracket through bolt and nut to 60 N.m (44 lb ft) plus 60 degrees.

2. Position the trailing arm to the vehicle.




3. Install the 3 trailing arm to knuckle bolts (1).

Tighten the 3 trailing arm to knuckle bolts to 180 N.m (133 lb ft).

4. Install the rear parking brake cable routing bolt to the trailing arm.

Tighten the routing bolt to 10 N.m (89 lb in).




5. Install the trailing arm bracket to body bolts.

Tighten the bracket to body bolts to 90 N.m (66 lb ft) plus 30 degrees plus an additional 15 degrees.

6. Install the rear tire and wheel assembly.
7. Lower the vehicle.