Defroster Duct Replacement - Windshield

Defroster Duct Replacement - Windshield

Removal Procedure

1. Remove the instrument panel (I/P) retainer.




2. Unsnap the defroster duct from the HVAC module and cross car beam. Bend the cluster wire harness tab on the cross car beam in order to remove the duct.

Installation Procedure




1. Align the defroster duct with the HVAC module and snap into place.
2. If the cluster wire harness tab on the cross car beam was bent during removal, bend the tab back into position.
3. Install the I/P retainer.