59. Camshaft Cover Installation

Camshaft Cover Installation




1. Assemble the camshaft cover and gasket. Ensure that the gasket is located in the retaining groove in the camshaft cover.

Notice: Refer to Fastener Notice.

2. Install the cover on the cylinder head and hand start the bolts.

Tighten the camshaft cover bolts to 10 N.m (89 lb in).




3. Install the front lift bracket.

Tighten the front lift bracket bolt to 25 N.m (18 lb ft).




4. Install the rear lift bracket.

Tighten the rear lift bracket bolts to 25 N.m (18 lb ft).





Notice: Refer to Fastener Notice.

5. Install the ground strap.

Tighten the camshaft cover ground strap bolts to 10 N.m (89 lb in).




6. Install the spark plugs.

Tighten the spark plugs to 20 N.m (15 lb ft).




7. Install the ignition coil and module assembly to the cam cover.

Tighten the ignition coil and module assembly bolts to 10 N.m (89 lb in).




8. Install the power steering blockout plate.

Tighten the power steering blockout plate bolts to 25 N.m (18 lb ft).