Door Jamb Switch Replacement - Front

Door Jamb Switch Replacement - Front

Removal Procedure




1. Pull out on the outer trim cover in order to release the retaining fasteners.
2. Slide the outer trim cover toward the rear of the vehicle.




3. Disconnect the Door Switch electrical connector.
4. Remove the Air Bag electrical connector from the outer trim panel.




5. Remove the Door Switch from the outer trim panel.

Installation Procedure




1. Install the Door Switch into the outer trim panel.




2. Install the Air Bag electrical connector to the blade on the outer trim panel.
3. Connect the door switch electrical connector.




4. Insert the tabs on the outer trim cover onto the slots on the I/P.
5. Align the retaining fasteners with the I/P.
6. Push the outer trim in order to secure.