Air Cleaner Housing: Service and Repair
Air Cleaner Assembly Replacement
Removal Procedure
1. Loosen the outlet duct clamp at the air cleaner assembly.
2. Remove the air cleaner assembly attachment nut.
3. Remove the air cleaner.
Installation Procedure
Important: Verify full engagement of the inlet onto the resonator neck.
1. Position the air cleaner assembly.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the air cleaner assembly attachment nut.
Tighten the nut to 10 N.m (89 lb in).
3. Connect the air cleaner resonator to the air cleaner assembly.
Tighten the air cleaner intake duct clamp to 5 N.m (44 lb in).