Armrest Pull Cup Replacement

Armrest Pull Cup Replacement

Removal Procedure






Important: This procedure is for the front seat pull cup. Rear seat pull cup replacement is similar.

1. Lift the pull cup liner.
2. Remove the pull cup screws.




3. Insert a small, flat-bladed tool under the rearward end of the pull cup and lift up.
4. Pull rearward to disengage the pull cup hook.
5. Disconnect the electrical connectors, if equipped.

Installation Procedure




1. Connect the electrical connectors.
2. Install the forward pull cup hook on the door trim.
3. Push down on the rearward end of the pull cup until the cup snaps into place.






Notice: Refer to Fastener Notice in Service Precautions.

4. Install the pull cup screws.

Tighten the screws to 2.5 N.m (23 lb in).

5. Reposition the pull cup liner.