Seat Cushion Outer Trim Panel Replacement - Front Seat (Non-Fold Flat)

Seat Cushion Outer Trim Panel Replacement - Front Seat (Non-Fold Flat)

Removal Procedure




1. Remove the front seat.
2. Remove the recliner handle by pulling firmly on the handle.




3. For vehicles equipped with 4-way adjustable seats, remove the riser trim handle on the driver side by pulling the handle.




4. Remove the screws from the outer trim panel of the front bucket seat cushion.
5. Remove the outer trim panel.

Installation Procedure




1. Install the outer trim panel to the front bucket seat cushion.

Notice: Refer to Fastener Notice.

2. Install the screws to the outer trim panel of the front bucket seat cushion.

Tighten the screws to 1 N.m (9 lb in).




3. For vehicles equipped with 4-way adjustable seats, install the riser trim handle on the driver side by pushing the handle.




4. Install the recliner handle by pushing firmly on the handle.
5. Install the front seat.