Dimmer Switch: Service and Repair

Instrument Panel Dimmer Switch Replacement

Removal Procedure




1. Pull up on the I/P upper compartment in order to release the retaining clips.
2. Disconnect the I/P dimmer switch electrical connector.
3. If equipped, disconnect the fog lamp switch electrical connector.




4. Remove the I/P dimmer switch from the I/P upper compartment.

Installation Procedure




1. Install the I/P dimmer switch into the I/P upper compartment.




2. Connect the I/P dimmer switch electrical connector.
3. If equipped, connect the fog lamp switch electrical connector.
4. Align the retaining clips on the I/P upper compartment to the I/P top panel.
5. Push the I/P upper compartment in order to secure.