Refrigerant Filter: Service and Repair
Air Conditioning (A/C) Refrigerant Filter Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the condenser tube and evaporator hose from the thermal expansion valve (TXV).
3. Remove and discard the seal washer.
4. Remove the refrigerant filter from the condenser tube.
Installation Procedure
1. Install the refrigerant filter into the condenser tube.
2. Install new sealing washers on the condenser tube and evaporator hose fittings.
3. Install the condenser tube and evaporator hose to the TXV.
Notice: Refer to Fastener Notice.
4. Install the TXV nut.
Tighten the nut to 20 N.m (15 lb ft).
5. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
6. Leak test the fittings using the J 39400-A.