Clutch Pedal Assembly: Service and Repair

Clutch Pedal Replacement

Removal Procedure




1. Remove the clutch pedal retainer from the front of the clutch pedal assembly.




2. Disconnect the clutch pedal position switch (2) from the clutch bracket.




3. Remove the clutch pedal pivot nut.




4. Disconnect the clutch master cylinder from the clutch pedal assembly.
5. Remove the clutch bracket to front of dash nuts.
6. Remove the clutch pedal and bracket assembly.




7. Remove the clutch pedal pivot bolt (1) and retainer (2).
8. Remove the clutch pedal.
9. Secure the clutch pedal and return spring and remove the clutch pedal pivot bolt.




10. Remove the clutch pedal (3), return spring (2), and pivot bushings (1).

Installation Procedure




1. Install the clutch pedal (3), return spring (2), and pivot bushings (1).




2. Secure the clutch pedal and return spring and install the clutch pedal pivot bolt (1) and retainer (2).




3. Install the clutch pedal and bracket assembly.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the clutch pedal bracket to front of dash nuts.

Tighten the nuts to 10 N.m (89 in lb).

5. Connect the clutch master cylinder to the clutch pedal assembly.




6. Install the clutch pedal pivot nut.

Tighten the nut to 10 N.m (89 lb in).




7. Connect the clutch pedal position switch (2) to the clutch pedal bracket.




8. Install the clutch pedal retainer to the front of the clutch pedal assembly.