Scan Tool Data Definitions

Scan Tool Data Definitions
Battery Voltage
- The scan tool displays Normal/Out of Range. This is the current battery voltage available at the body control module (BCM) with normal being between 9 and 16 volts.

Door Ajar Switch
- The scan tool displays Door Closed/Door Ajar. The passenger door ajar switch input to the BCM, where an open door is displayed as Door Ajar.

Door Cylinder Switch
- The scan tool displays Voltage.

Door Cylinder Switch
- The scan tool displays Idle/Lock/Unlock/Invalid. The driver door key cylinder switch state.

Driver Door Ajar Sw.
- The scan tool displays Door Closed/Door Ajar. The driver door ajar switch input to the BCM, where an open door is displayed as Door Ajar.

Driver Door Lock Actuator Command
- The scan tool displays Idle/Lock/Unlock/Invalid. The state of the driver door lock actuator output.

Passenger Doors Lock Actuator Command
- The scan tool displays Idle/Lock/Unlock/Invalid. The state of the passenger door lock actuators outputs.

Trunk Ajar Switch
- The scan tool displays the status of the trunk ajar switch.

Trunk Motor
- The scan tool displays the current state of the trunk release motor.

Trunk Release Solenoid Command
- The scan too displays the status of the truck release solenoid output control.

Trunk Release Switch
- The scan tool displays the status of the trunk release switch input.