Radio Stowage Case Replacement

Radio Stowage Case Replacement

Removal Procedure





1. Remove the radio.

* Install the removal bar into the openings (arrows) until it engages.
* Pull both removal bars outwards and at the same time withdraw the radio from the holder.

2. Disconnect the wiring harness plug.
Disconnect the 2 wiring harness plugs (1, 2).




3. Disconnect the radio storage frame (arrows) and remove.



Installation Procedure

1. Install the radio storage frame.
2. Connect the 2 wiring harness plugs.
3. Install the radio.
Push the radio into the holder until it audibly engages.
4. Program the radio.