Console Shift Lever Bezel Replacement

Console Shift Lever Bezel Replacement

Removal Procedure





1. Remove the hand brake molding (1).
Disconnect the hand brake molding.




2. Remove the ashtray.

1. Disconnect the 2 wiring harness plugs.
2. Remove the ashtray.





3. Remove the shift level bezel.
Remove the 2 bolts (1).



Installation Procedure


Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the shift level bezel.

Tighten the 2 bolts to 2.5 N.m (22 lb in).

2. Install the ashtray.

1. Insert the ashtray.
2. Connect the 2 wiring harness plugs.

3. Install the hand brake molding.
Connect the hand brake molding.