Seat Temperature Switch: Service and Repair

Front Seat Heater Switch Replacement

Removal Procedure

1. Remove the heating/air conditioning control. Refer to Heater and Air Conditioning Control Replacement (Service and Repair) .




2. Remove the accessory panel on instrument panel (I/P) padding.

1. Remove the 2 bolts (1).
2. Remove the panel.
3. Disconnect the wiring harness plug (2).
4. Release and disconnect the wiring harness plug.





3. Remove the accessory panel.
Release the 2 locks (1).



Installation Procedure

1. Install the accessory panel.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the accessory panel on I/P padding.

* Connect the wiring harness plug.
* Install the accessory trim panel.

Tighten the 2 bolts to 2.5 N.m (22 lb in).


3. Install heating/air conditioning unit control. Refer to Heater and Air Conditioning Control Replacement (Service and Repair) .