42. Oil Pump Installation

Oil Pump Installation





1. Clean the sealing surface.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the oil pump cover (1) and bolts (2).

Tighten the 6 bolts to 8 N.m (71 lb in).






Important: Note the different screw lengths.


3. Replace the pump module gasket.
4. Install the pump module.
5. Tighten the 8 bolts (1, 2).

Tighten the 8 bolts to 20 N.m (15 lb ft).