45. Oil Pan Installation

Oil Pan Installation





1. Clean the sealing surfaces.
2. Apply approximately a 3.5 mm thick bead of oil pan sealant to the joints (arrows).





Important: The assembly time, including torque check, must take no longer than 10 minutes.


3. Apply approximately a 3.5 mm thick bead of oil pan sealant (1) to the oil pan.
4. Install the oil pan.

Notice: Refer to Fastener Notice (Fastener Notice) .

5. Install the oil pan bolts.

Tighten the 13 bolts on the cylinder block to 10 N.m (89 lb in).