Instrument Panel, Gauges and Warning Indicators: Service and Repair

Accessory Switch Replacement

Removal Procedure

1. Remove the heater/air conditioning control. Refer to Heater and Air Conditioning Control Replacement (Service and Repair) .




2. Remove the instrument panel (I/P) padding cover.

* Remove the 2 bolts (1).
* Remove the panel.
* Disconnect the wiring harness plug (2).
* Release the wiring harness plug and disconnect.





3. Remove the accessory switch.
Release the 2 locks (1).



Installation Procedure

1. Install the accessory switch.
Release the 2 locks.
2. Install the I/P padding cover.

* Connect the wiring harness plug.
* Install the panel.

Tighten the 2 screws.


3. Fit heater/air conditioning unit control. Refer to Heater and Air Conditioning Control Replacement (Service and Repair) .