Headlamp Bulb Replacement (Non HID)

Headlamp Bulb Replacement (without High Intensity)

Removal Procedure
Caution: Refer to Halogen Bulb Caution (Technician Safety Information) .

1. Open the access panel in the wheelhouse liner.
2. Remove the cover access on the headlamp.





Important: Release the lamp holder by twisting (arrow).


3. Remove the lamp holder.
4. Disconnect the lamp.

* Release the 2 clips (1).
* Disconnect the wiring harness plug (2).




Installation Procedure

1. Connect the lamp.
Connect the wiring harness plug.
2. Install the lamp holder.

Important: Ensure correct position of the access panel.


3. Install the access cover on the headlamp.
4. Close the access panel in the wheelhouse liner.