Barometric Pressure Sensor: Service and Repair

Barometric Pressure Sensor Replacement

Removal Procedure

1. Raise the vehicle.




2. Remove the wiring harness of the barometric pressure sensor (1).

* Remove the wiring harness plug (2).
* Remove the 1 or 2 cable ties (3).





3. Remove the barometric pressure sensor (1).
Remove the bolt (2).



Installation Procedure


Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the barometric pressure sensor.

Tighten the bolt to 5 N.m (44 lb in).

2. Install the wiring harness of the barometric pressure sensor.

* Install the wiring harness plug.
* Install the cable ties .

3. Lower the vehicle.