Liftgate Actuator Switch Replacement (L08)
Liftgate Actuator Switch Replacement (L08)
Removal Procedure
1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Sedan) (Service and Repair)Liftgate Trim Panel Replacement (Coupe) (Service and Repair) .
Important: The center fastening bolts are installed from outside with additional locking compound.
2. Remove the liftgate trim panel.
* Disconnect the wiring harness plug (2).
* Remove the 6 nuts (1).
3. Remove the actuator switch from the liftgate panel.
* Remove the 2 bolts from the guide (arrow).
* Disconnect the wiring harness plug (2).
* Disconnect the wiring harness.
* Remove the 2 retaining lugs (1).
* Remove the switch.
Installation Procedure
1. Install the switch in the liftgate panel.
* Install in the switch.
* Connect the wiring harness.
* Connect the wiring harness plug.
* Install the 2 bolts into the guide.
Notice: Refer to Fastener Notice (Fastener Notice) .
2. Install the liftgate applique panel.
Connect the wiring harness plug.
Tighten the 6 nuts to 3 N.m (26 lb in).
3. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Sedan) (Service and Repair)Liftgate Trim Panel Replacement (Coupe) (Service and Repair) .