Front Differential Carrier Seal Installation

Front Differential Carrier Seal Installation

Special Tools

KM-446 Installer Drift





1. Using KM-446 , drive in a NEW front differential carrier seal assembly (800). Distance from the outer edge of the torque converter housing:

Distance of carrier seal to torque converter housing 5.2-6.2 mm (0.20-1.24 in)

2. Coat the NEW front differential carrier seal assembly with grease.




3. Using KM-446 , drive in a NEW front wheel drive shaft oil seal (80). Distance from the outer edge of the transmission case assembly (17):

Distance of front wheel drive shaft oil seal to transmission case assembly 0±0.5 mm (0.0-0.02 in)

4. Coat the NEW front wheel drive shaft oil seal with grease.