Flywheel: Service and Repair

Engine Flywheel Replacement

Special Tools

L0009466 Flywheel Holding Tool


Removal Procedure





1. Remove the manual transmission. Refer to Transmission Replacement (Transmission Only) (Transmission Replacement (Transmission Only))Transmission Replacement (Engine and Transmission) (Transmission Replacement (Engine and Transmission)) .
2. Remove the thrust plate and clutch disc. Refer to Clutch, Pressure Plate, and Pilot Bearing Replacement (Service and Repair) .
3. Remove the flywheel.

* Lock the flywheel via the starter ring gear with L0009466 (1).
* Remove the 6 bolts.




Installation Procedure

1. Install the flywheel.

* Clean the thread in the crankshaft.

Notice: Refer to Fastener Notice (Fastener Notice) .

* Use new bolts.

Tighten the 6 bolts to 35 N.m (26 lb ft) plus 30 degrees plus 15 degrees.

* Remove L0009466 .

2. Install the thrust plate and clutch disc. Refer to Clutch, Pressure Plate, and Pilot Bearing Replacement (Service and Repair) .
3. Install the manual transmission. Refer to Transmission Replacement (Transmission Only) (Transmission Replacement (Transmission Only))Transmission Replacement (Engine and Transmission) (Transmission Replacement (Engine and Transmission)) .