Emergency Contact Module: Service and Repair

OnStar Module Bracket Assembly Replacement

Removal Procedure

1. Remove the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (Service and Repair).
2. Remove the communication interface module. Refer to Communication Interface Module Replacement (Service and Repair).




3. Remove the OnStar bracket bolts.




4. Remove the OnStar module bracket.



Installation Procedure





1. Install the OnStar module bracket.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Tighten the OnStar bracket bolts.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the communication interface module. Refer to Communication Interface Module Replacement (Service and Repair).
4. Install the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (Service and Repair).