51. Cylinder Head Installation

Cylinder Head Installation

Tools Required

J 45059 Angle Meter






Important: Do not use any sealing material.


1. Install the cylinder head gasket to the block.
2. Install the cylinder head.





Important: Always use new cylinder head bolts.



Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install and tighten the cylinder head bolts in sequence.

* Tighten the bolts to 30 N.m (22 lb ft).
* Tighten the bolts an additional 155 degrees in sequence. Use the J 45059 .






4. Install the front cylinder head bolts.

Tighten the cylinder head bolts to 35 N.m (26 lb ft).