Antenna Mast: Service and Repair

Electronic Navigation Antenna Replacement

Removal Procedure

1. Remove the info display. Refer to Driver Information Display Replacement (Service and Repair).
2. Remove the info display panel.




3. Remove the GPS antenna (1) for the navigation system.

* Release the 2 clips.
* Release the wiring harness plug and disconnect.

Installation Procedure

1. Install the GPS antenna for navigation system.

* Connect and lock the wiring harness plug.
* Clip in the 2 clips.

2. Install the info display panel.
Clip in the 2 clips.
3. Install the info display. Refer to Driver Information Display Replacement (Service and Repair).