Liftgate Lock Striker Replacement (Coupe)

Liftgate Lock Striker Replacement (Coupe)

Removal Procedure




1. Open the liftgate.
2. Remove the rear compartment carpet.





Note: Remove the rear compartment sill trim panel by using slow and even pressure.

3. Remove the rear compartment sill trim panel.
Release the 7 clips (1).





Note: Mark the installation position.

4. Remove the liftgate lock striker (arrow).
Remove the 2 bolts (1).

Installation Procedure

Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the liftgate lock striker.

Tighten the 2 bolts to 20 Nm (15 lb ft).

2. Install the rear compartment sill trim panel.
Install the 7 clips.
3. Install the rear compartment carpet.
4. Close the liftgate.