Front Floor Console Compartment Replacement

Front Floor Console Compartment Replacement

Removal Procedure




1. Remove the front floor console cover (1).




2. Carefully remove the selector lever knob (2) from selector lever cover.
Slide the knob upwards
3. Remove the selector lever cover from the front floor console.
Remove the 2 bolts (1).




4. Remove the storage compartment front floor console (1) from the selector lever cover (2).

1. Carefully push the selector lever cover (arrows) outwards.
2. Push the selector lever cover in the direction of the parking brake lever.
3. Disconnect the wiring harness plug.

Installation Procedure

1. Install the storage compartment front floor console to the selector lever cover.
Connect the wiring harness plug.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the selector lever cover to the front floor console.

Tighten the 2 bolts to 2.5 Nm (22 lb in).

3. Install the selector lever knob to the selector lever cover.
4. Install the front floor console cover.