Instrument Panel Compartment Replacement

Instrument Panel Compartment Replacement

Removal Procedure





Remove the instrument panel (I/P) compartment.

1. Open the I/P compartment door.
2. Remove the 4 bolts (1).
3. Disconnect the wiring harness plug.
4. Remove the I/P compartment.

Installation Procedure

1. Insert the I/P compartment.
Connect the wiring harness plug.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Fasten the I/P compartment.

Tighten the 4 bolts to 4 Nm (35 lb in).

3. Close the glove compartment door.