Seat Temperature Switch: Service and Repair

Front Seat Heater Switch Replacement

Removal Procedure

1. Remove the heating/air conditioning control. Refer to Heater and Air Conditioning Control Replacement (Service and Repair).




2. Remove the accessory panel on instrument panel (I/P) padding.

1. Remove the 2 bolts (1).
2. Remove the panel.
3. Disconnect the wiring harness plug (2).
4. Release and disconnect the wiring harness plug.




3. Remove the accessory panel.
Release the 2 locks (1).

Installation Procedure

1. Install the accessory panel.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the accessory panel on I/P padding.

* Connect the wiring harness plug.
* Install the accessory trim panel.

Tighten the 2 bolts to 2.5 Nm (22 lb in).

3. Install heating/air conditioning unit control. Refer to Heater and Air Conditioning Control Replacement (Service and Repair).