14. Timing Belt Tensioner Removal

Timing Belt Tensioner Removal

Special Tools
* KM-6333 Fixing Rod
* MK-6340 Locking Tool
* KM-6625 Flywheel Locking Device




1. prepare the right half of the MK-6340 for use on the Z 18 16 XER engines

Important: The front panel of the MK-6340 -Right is recognized by the lettering "Right", arrow.


1. Remove the front panel (1) from the MK-6340 -Right.
2. Remove the 2 bolts (2).





Important:
* The spot-type marking (4) on the intake camshaft adjuster does not correspond to the groove of the MK-6340 -Left during this process but must be somewhat above.

* The spot-type marking (3) on the exhaust camshaft adjuster must correspond to the groove on the MK-6340 -Right.


2. Insert MK-6340 -Left (1) and MK-6340 -Right (2) into the camshaft adjuster.




3. Block the crankshaft.
4. Attach the KM-6625 .

1. Detach the screwed connection (1).
2. Insert the KM-6625 (2).
3. Tighten the screwed connection (3).




5. Using an Allen key (1), apply tension to the timing belt tensioner (2) in the direction of the arrow. Fix, using the KM-6333 .
6. Mark the timing belt direction of rotation.




7. Remove the timing belt tensioner bolt (2).
8. Remove the timing belt tensioner (1).