32. Piston and Connecting Rod Assemble

Piston and Connecting Rod Assemble




1. Install the piston rings.

* Insert into the pistons with piston ring wrench and "TOP" pointing upwards.
* Set the piston ring gap.

- First piston ring (right-hand ring) in position (1)
- Second piston ring (minute ring) in position (2)
- Interim ring of oil scraper ring in position (3), steel band rings of oil scraper ring in position (4 and/or 5)

Important: Note installation position of the piston in respect of the con-rod.


2. Attach the piston to the con-rod.

* Press the piston pin into the piston and the con-rod by hand.
* Insert the retainer in the annular groove on the piston.
* Ensure the retainer is firmly seated in the groove.

3. Install the piston with con-rod. Refer to 1401300 - Piston with Con-rod, Remove and Install.