Headlamp Bulb Replacement (Non HID)
Headlamp Bulb Replacement (without High Intensity)
Removal Procedure
Warning: Refer to Halogen Bulb Warning (Service Precautions).
1. Open the access panel in the wheelhouse liner.
2. Remove the cover access on the headlamp.
Note: Release the lamp holder by twisting (arrow).
3. Remove the lamp holder.
4. Disconnect the lamp.
* Release the 2 clips (1).
* Disconnect the wiring harness plug (2).
Installation Procedure
1. Connect the lamp.
Connect the wiring harness plug.
2. Install the lamp holder.
Note: Ensure correct position of the access panel.
3. Install the access cover on the headlamp.
4. Close the access panel in the wheelhouse liner.