Barometric Pressure Sensor: Service and Repair

Barometric Pressure Sensor Replacement

Removal Procedure

1. Raise the vehicle.




2. Remove the wiring harness of the barometric pressure sensor (1).

* Remove the wiring harness plug (2).
* Remove the 1 or 2 cable ties (3).




3. Remove the barometric pressure sensor (1).
Remove the bolt (2).

Installation Procedure

Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the barometric pressure sensor.

Tighten the bolt to 5 Nm (44 lb in).

2. Install the wiring harness of the barometric pressure sensor.

* Install the wiring harness plug.
* Install the cable ties.

3. Lower the vehicle.