Front Side Door Window Weatherstrip Replacement (Coupe)

Front Side Door Window Weatherstrip Replacement (Coupe)

Removal Procedure

Warning: Refer to Express Down Feature Warning (Service Precautions).

1. Lower the window.
2. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement (Coupe) (Service and Repair)Front Side Door Trim Panel Replacement (Sedan) (Service and Repair).




3. Partly loosen the water vapor barrier.

1. Remove the 2 holding angles.
2. Remove the 2 pins.





Note: Remove the window channel weatherstrip from inside with the appropriate tool.

4. Remove the outer channel weatherstrip.

1. Remove the window channel weatherstrip from the rear window frame bracket.
2. Remove the fastening clip from the outer window frames.




5. Remove the rear window channel rail.
Drill out the 2 blind rivets.
6. Take out rear window channel.

Note: Guide the window so in position that the fastening bolts align with the top mounting holes.

7. Loosen the front door window.

1. Remove the 2 bolts.
2. Remove the window regulator from its guide.

Note: Lower the window downward and simultaneously tilt the window forwards.

8. Remove the front door window.

1. Remove the window from the window regulator guide.
2. Remove the window upwards.




9. Remove the window guide.

Installation Procedure

1. Install the window guide.

Note: Gently raise the window upward and simultaneously tilt the window forwards.

2. Install front door window weatherstrip.

1. Position the window downwards.
2. Install the window in the window regulator guide.

Caution: Refer to Fastener Caution (Fastener Caution).

Note: Guide the window in position so that the fastening bolts align with the mounting holes.

3. Install the front door window and tighten the 2 bolts to 2.5 Nm (22 lb in).
Install the window regulator arm in the window guide.
4. Position the rear window channel.
5. Install the rear window channel.
Rivet on the 2 rivets.
6. Install the outer channel weatherstrip.

1. Install the fastening clip on the outer window frame.
2. Install the window channel weatherstrip in the window channel bracket.
3. Press the window channel weatherstrip onto the door folding.

7. Install the water vapor barrier.

1. Install the 2 holding angles.
2. Install the 2 pins.

8. Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement (Coupe) (Service and Repair)Front Side Door Trim Panel Replacement (Sedan) (Service and Repair).
9. Close the window.