Windshield Washer Hose Replacement

Windshield Washer Hose Replacement

Important:
* Repair kit is suitable for repairs to pumps, spray nozzle or any part of the washer/wiper hose.

* Remove the relevant panelling, if necessary.


1. Remove the air inlet screen. Refer to Air Inlet Screen Replacement (Air Inlet Screen Replacement).
2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Front Bumper Fascia Replacement).





Important: Cut through the hose in the valley (1).


3. Cut the washer/wiper system hose at the point of fracture.




4. Install the new rubber rings.
Attach the 2 rubber rings (arrow).
5. Prepare both ends of the hose.
Grease both rubber rings with silicone grease.




6. Insert the connector (1) and secure.
Attach the 2 securing elements (2).
7. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (Front Bumper Fascia Replacement).
8. Install the air inlet screen. Refer to Air Inlet Screen Replacement (Air Inlet Screen Replacement).