Cylinder Head Assembly: Specifications

Cylinder Head Bolt - M8

Right Sequence:

Left Sequence:

First Pass 15 Nm (11 lb ft)
Final Pass 75 Degrees

Cylinder Head Bolt - M11

First Pass 30 Nm (22 lb ft)
Final Pass 150 degrees

NOTE: DO NOT allow oil on the cylinder head bolt bosses. DO NOT reuse the old cylinder head bolts.

INTAKE MANIFOLD

Upper-to-Cylinder Head Bolt - Long 23 Nm (17 lb ft)

Upper-to-Cylinder Head Bolt - Short 23 Nm (17 lb ft)

Upper-to-Lower Intake Manifold Bolt 23 Nm (17 lb ft)

CAMSHAFT

Right (SFI):

Left (SFI):

Camshaft Cap Bolt 10 Nm (89 lb in)

EXHAUST MANIFOLD

Bolt 20 Nm (15 lb ft)