Secondary Timing Chain Tensioner Shoe Replacement - Left

SECONDARY TIMING CHAIN TENSIONER SHOE REPLACEMENT - LEFT

Removal Procedure

1. Remove the spark plugs in order to ease crankshaft/engine rotation. Service and Repair

2. Remove the engine front cover. Service and Repair

3. Remove the left bank secondary camshaft drive chain tensioner. 26. Secondary Timing Chain Tensioner Removal - Left Side

4. Remove the left bank secondary camshaft drive chain shoe. 27. Secondary Camshaft Drive Chain Shoe Removal - Left Side






5. Remove the left secondary camshaft drive chain shoe bolt.






6. Remove the left secondary camshaft drive chain shoe.

Installation Procedure






1. Ensure that the left secondary camshaft drive chain shoe (2) is being installed.






2. Position the left secondary camshaft drive chain shoe. 111. Secondary Camshaft Drive Chain Shoe Installation - Left Side






Caution: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Do not use paints, lubricants, or corrosion inhibitors on fasteners, or fastener joint surfaces, unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems. When using fasteners that are threaded directly into plastic, use extreme care not to strip the mating plastic part(s). Use hand tools only, and do not use any kind of impact or power tools. Fastener should be hand tightened, fully seated, and not stripped.

3. Install the secondary camshaft drive chain shoe bolt.

Tighten the secondary camshaft drive chain shoe bolt to 23 Nm (17 lb ft).

4. Install the left bank secondary camshaft drive chain tensioner. 112. Secondary Timing Chain Tensioner Installation - Left Side

5. Install the engine front cover. Service and Repair

6. Install the spark plugs. Service and Repair