Programming and Relearning

PRECAUTION

SUPPLEMENTAL RESTRAINT SYSTEM

a. Wait for at least 90 seconds after disconnecting the negative (-) terminal from the battery when performing the following.
1. Replacing the airbag sensor assembly center, airbag sensor front LH, airbag front RH sensor, side airbag sensor assembly LH and RH, and airbag sensor rear LH and RH.
2. Adjusting the front or rear door of the vehicle equipped with the side airbag and curtain shield airbag.

b. When connecting or disconnecting the connectors, ensure that the airbag sensor assembly center, airbag sensor front LH, airbag front RH sensor, side airbag sensor assembly LH and RH, and airbag sensor rear LH and RH have already been installed in the vehicle.
c. Do not use an airbag sensor assembly center, airbag sensor front LH, airbag front RH sensor, side airbag sensor assembly LH and RH, or airbag sensor rear LH and RH that has been dropped during the operation or transportation.
d. When installing the airbag sensor assembly center, airbag sensor front LH, airbag front RH sensor, side airbag sensor assembly LH and RH, and airbag sensor rear LH and RH, ensure that they are installed with the specified torque.
e. Do not disassemble the airbag sensor assembly center, airbag sensor front LH, airbag front RH sensor, side airbag sensor assembly LH and RH, or airbag sensor rear LH and RH.