Crankshaft Position Sensor: Service and Repair

REPLACEMENT

1. REMOVE CRANKSHAFT POSITION SENSOR




a. Disconnect the crankshaft position sensor connector.
b. Remove the bolt and crankshaft position sensor.

2. INSTALL CRANKSHAFT POSITION SENSOR
a. Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.
b. Install the crankshaft position sensor with the bolt.

Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)

c. Connect the crankshaft position sensor connector.