Interior - Back Door Trim is Loose

BODY
BO020-03

November 10, 2003

Title
BACK DOOR TRIM LOOSE

Models
'04 Scion xB

Introduction





Some customers may notice a gap between the back door trim board and the inside back door panel on the 2004 model year Scion xB. Please use the following procedure to improve the condition.

Applicable Vehicles
^ 2004 model year Scion xB vehicles produced BEFORE the Production Change Effective VIN shown below.





Production Change Information





Warranty Information

Applicable Warranty:

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.





Required Tools & Material

NOTE:
To order these 3M products, contact your local 3M distributor or you may contact RS Hughes Co. at 1-877-744-8443.





Parts Information

Repair Procedure

1. Remove the 11 clips and back door trim board.

2. Remove any dust, dirt and oil from the attaching surfaces of the double sided adhesive tape on the inside back door panel and the back door trim board.

3. Apply primer to the attaching surfaces of the double sided adhesive tape on the back door trim board.





4. Attach double sided adhesive tape to the back door trim board as shown.

5. Re-install the back door trim board using new clips.

6. Use constant and steady pressure when pressing the positions where the double sided adhesive tape is attached.