Clutch Start Switch Assembly Replacement

CLUTCH START SWITCH ASSY (MTM)
REPLACEMENT
1. REMOVE CLUTCH START SWITCH ASSY
a. Disconnect the clutch start switch assy connector.





b. Remove the 2 nuts and the clutch start switch assy with the bracket.
c. Remove the nut and clutch start switch assy from the bracket.
2. INSTALL CLUTCH START SWITCH ASSY
a. Install the clutch start switch assy with the nut.
Torque: 6.2 Nm (63 kgf-cm, 55 in. lbs.)
b. Install the clutch start switch with the 2 nuts.
Torque: 6.2 Nm (63 kgf-cm, 55 in. lbs.)
c. Connect the clutch start switch assy connector.
3. INSPECT CLUTCH START SWITCH ASSY