Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL FRONT BUMPER SIDE SUPPORT LH
(a) Attach the 2 clips to install the side support.






(b) Install the screw and bolt.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
2. INSTALL FRONT BUMPER SIDE SUPPORT RH
(a) Attach the 2 clips to install the side support.
(b) Install the screw and bolt.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf) for screw
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf) for bolt
3. INSTALL FRONT BUMPER REINFORCEMENT
(a) Install the reinforcement with the 6 nuts.
4. INSTALL FRONT BUMPER ENERGY ABSORBER
5. INSTALL FRONT BUMPER COVER






(a) Put protective tape under the front fender.
(b) Attach the 6 claws labeled A and 2 claws to install the bumper cover.






(c) Install the 3 screws, 2 bolts, clip labeled A, 2 clips labeled B and 2 radiator protectors.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
6. INSTALL FRONT FENDER LINER LH
(a) Install the fender liner with the 3 screws.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
7. INSTALL FRONT FENDER LINER RH
(a) Install the fender liner with the 3 screws.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)