Disassembly

ENGINE HOOD / DOOR: BACK DOOR: DISASSEMBLY

DISASSEMBLY

1. REMOVE BACK DOOR GARNISH CENTER






(a) Using a screwdriver, detach the 8 claws and remove the garnish.
HINT: Tape the screwdriver tip before use.

2. REMOVE BACK DOOR SIDE GARNISH LH






(a) Using a screwdriver, detach the 6 claws and remove the garnish.
HINT: Tape the screwdriver tip before use.

3. REMOVE BACK DOOR SIDE GARNISH RH
(a) Using a screwdriver, detach the 6 claws and remove the garnish.
HINT: Tape the screwdriver tip before use.

4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY






(a) Remove the 2 screws indicated by the 2 black arrows in the illustration.
(b) Using a clip remover, remove the 2 clips indicated by the 2 white arrows in the illustration.
(c) Using a screwdriver, detach the 9 clips and remove the trim.
HINT: Tape the screwdriver tip before use.

(d) Remove the No. 1 service hole cover.
(e) Remove the No. 2 service hole cover.
5. REMOVE CENTER STOP LIGHT ASSEMBLY Removal

6. REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE

7. REMOVE LICENSE PLATE LIGHT ASSEMBLY Disassembly

8. REMOVE BACK DOOR STOPPER LOWER






(a) Remove the bolt and stopper.
9. REMOVE BACK DOOR LOWER STOPPER CUSHION






(a) Remove the 2 bolts and stopper cushion.
10. REMOVE BACK DOOR STAY ASSEMBLY LH Removal

11. REMOVE BACK DOOR STAY ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

12. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET LH






(a) Remove the 2 bolts and bracket.
13. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET RH
(a) Remove the 2 bolts and bracket.
14. REMOVE BACK DOOR LOCK ASSEMBLY






(a) Disconnect the connector and clamp.
(b) Remove the 3 bolts and lock.