Initial Inspection and Diagnostic Overview

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING
HINT: Use this procedure to troubleshoot the wireless door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
- If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT -- Continue to next step.
3. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK
NEXT -- Continue to next step.
4. PROBLEM SYMPTOMS TABLE
Result:






B -- Go to step 5
A -- Continue to next step.
5. OVERALL ANALYSIS AND TROUBLESHOOTING
(a) Terminals of ECU Pinout Values and Diagnostic Parameters

(b) Operation check Component Tests and General Diagnostics

NEXT -- Continue to next step.
6. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
7. CONFIRMATION TEST
NEXT -- END