Cruise Control: Service Precautions

CRUISE CONTROL: CRUISE CONTROL SYSTEM: PRECAUTION

PRECAUTION
NOTE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.





1. Pay attention to the following points when inspecting the cruise control system.
(a) Push the cruise control main switch ON-OFF button off when not using the cruise control.
(b) Be careful of vehicle speed increase when driving downhill with the cruise control on.
(c) "RES/+" operation, after canceling the cruise control, works as RESUME, and works as "+" (ACCEL) while the cruise control system is operating.
(d) Push the cruise control main switch ON-OFF button off and reset the cruise control if the CRUISE main indicator light blinks while the cruise control system is operating. When the cruise control can not be set by this procedure or canceled immediately after setting, there may be a malfunction in the system.
(e) Do not use the cruise control system where the road conditions are as follows:
- Heavy traffic
- Steep downhill
- Sharp turns
- Icy or snowy roads
- Slippery roads