Road Test

CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST

ROAD TEST
HINT: SET and '-', RES and '+', ON-OFF functions share the same switch. Operate the cruise control main switch according to the directions ([down], [up], <--) indicated on the switch.

1. PROBLEM SYMPTOM CONFIRMATION
(a) Inspect the SET function.
(1) Push the ON-OFF button.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push down the cruise control main switch to "SET / -".
(4) After releasing the switch, check that the vehicle cruises at the set speed.






(b) Inspect the '+' (ACCEL) function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push down the cruise control main switch to "SET / -".
(4) Check that vehicle speed increases while the cruise control main switch is pushed up to "RES / +" , and that the vehicle cruises at the newly set speed when the switch is released.
(5) Momentarily (approximately 0.6 seconds) push up the cruise control main switch to "RES / +" and then immediately release it. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (Tap-up function).





(c) Inspect the '-' (COAST) function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push down the cruise control main switch to "SET / -".
(4) Check that vehicle speed decreases while the cruise control main switch is pushed down to "SET / -", and the vehicle cruises at the newly set speed when the switch is released.
(5) Momentarily (approximately 0.6 seconds) push down the cruise control main switch to " SET / -", and then immediately release it. Check that the vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (Tap-down function).





(d) Inspect the CANCEL function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push down the cruise control main switch to "SET / -".
(4) When doing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.

- Depressing the brake pedal
- Depressing the clutch pedal (Manual Transaxle)
- Moving the shift lever from the D position to the N, 2 or L position.
- Pushing the ON-OFF button off
- Pulling the cruise control main switch to CANCEL





(e) Inspect the RES (RESUME) function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push down the cruise control main switch to "SET / -".
(4) When doing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.

- Depressing the brake pedal
- Depressing the clutch pedal (manual Transaxle)
- Moving the shift lever from the D position to the N, 2 or L position.
- Pulling the cruise control main switch to CANCEL
(5) After pushing the cruise control main switch to "RES / +" at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed prior to the cancellation.