Reassembly

2AZ-FE LUBRICATION: OIL PUMP: REASSEMBLY

REASSEMBLY

1. INSTALL OIL PUMP ROTOR
(a) Remove the oil pump rotor.
(b) Coat the drive rotor and driven rotor with engine oil.






(c) Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.
2. INSTALL OIL PUMP COVER






(a) Install the oil pump cover with the 5 bolts.
Torque: 8.8 Nm (90 kgf-cm, 78 in-lbf)
3. INSTALL OIL PUMP RELIEF VALVE






(a) Coat the relief valve with engine oil.
(b) Insert the relief valve and spring into the pump body hole.
(c) Using a 27 mm socket wrench, install the plug.
Torque: 49 Nm (500 kgf-cm, 36 ft-lbf)
4. INSTALL OIL PUMP STRAINER SET






(a) Install a new gasket and the oil strainer with the 2 nuts.
Torque: 8.8 Nm (90 kgf-cm, 78 in-lbf)