Removal

2AZ-FE LUBRICATION: OIL PUMP: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE HOOD SUB-ASSEMBLY
3. REMOVE FRONT WHEEL RH
4. REMOVE ENGINE UNDER COVER RH
5. REMOVE ENGINE UNDER COVER LH
6. REMOVE FRONT FENDER APRON SEAL RH
7. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
8. DRAIN ENGINE OIL Replacement

9. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

10. REMOVE FAN AND GENERATOR V BELT Removal

11. REMOVE GENERATOR ASSEMBLY Removal

12. DISCONNECT VANE PUMP ASSEMBLY
13. REMOVE ENGINE MOUNTING INSULATOR RH Removal

14. REMOVE IGNITION COIL ASSEMBLY Removal

15. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY Removal

16. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY Removal

17. REMOVE CRANKSHAFT POSITION SENSOR Removal

18. REMOVE OIL PAN SUB-ASSEMBLY Removal

19. SET NO. 1 CYLINDER TO TDC/COMPRESSION Removal

20. REMOVE CRANKSHAFT PULLEY Removal

21. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY Removal

22. REMOVE TIMING CHAIN COVER SUB-ASSEMBLY Removal

23. REPLACE TIMING CHAIN COVER OIL SEAL Replacement

24. REMOVE NO. 1 CRANKSHAFT POSITION SENSOR PLATE
25. REMOVE TIMING CHAIN GUIDE Removal

26. REMOVE CHAIN TENSIONER SLIPPER Removal

27. REMOVE CHAIN SUB-ASSEMBLY
28. REMOVE NO. 1 CHAIN VIBRATION DAMPER Removal

29. REMOVE CRANKSHAFT TIMING SPROCKET
30. REMOVE NO. 2 CHAIN SUB-ASSEMBLY Removal

31. REMOVE OIL PUMP DRIVE GEAR
32. REMOVE OIL PUMP ASSEMBLY






(a) Remove the 3 bolts, oil pump and gasket.