Disassembly

AIR CONDITIONING: COMPRESSOR AND MAGNETIC CLUTCH: DISASSEMBLY

DISASSEMBLY

1. REMOVE MAGNET CLUTCH ASSEMBLY






(a) Using SST, hold the magnet clutch hub.
SST: 95047-10400
(b) Remove the bolt, magnet clutch hub and magnet clutch washer.
HINT: There is no set number of magnet clutch washers since they are used for adjusting.





(c) Using a snap ring expander, remove the snap ring and magnet clutch rotor.
NOTE: Do not damage the seal cover of the bearing when removing the snap ring.

(d) Disconnect the connector.






(e) Using a snap ring expander, remove the snap ring and magnet clutch starter.